The precursor of the Electronic Engineering and Information Technology Department was the Electrical Engineering Department, which was established in 1958. The Electronic Engineering and Information Technology Department branched off from it in 1997.
 Under this department, there are three major branches:
        (1)   Electronic Engineering,
        (2)   Information Technology and
        (3)   Mechatronic Engineering.
 The most important aim and objective of the department is to train and produce electronic engineers and information technology specialists in addition to mechatronic engineers.

THE COURSES OF STUDY

UNDERGRADUATE COURSES

This department still turned out electronic engineers holding bachelor degree before 2004. The course for the bachelor degree lasted for six years. The students were taught basic science subjects such as English, Maths, Physics, Chemistry, etc. in the first and second years.  In the third year to final year, they were taught the respective engineering subjects.

POST GRADUATE COURSES

 Master  of Electronics – M.E (EC), (YTU)
 Master  of Information Technology – M.E (IT), (YTU)
 Master  of Mechatronics – M.E (MC), (YTU)
 Doctorate- Ph.D (Electronic), (YTU)
 Doctorate- Ph.D (Information Technology), (YTU)
 Doctorate- Ph.D (Mechatronic), (YTU)

The course for the master degree lasts for two years including the thesis. This department produces three kinds of the mastery degree in electronic engineering, information technological engineering and mechatronic engineering. The course for the doctorate degree lasts for three years including the thesis. There are two kinds of the doctorate programs. One is the plan A program while the other is the plan B program. The plan A program takes one year for the course work and two years for the thesis. Under the plan B program, it is required to do a preliminary research within a year. Only after the preliminary research, the students are regarded as Ph.D candidates. After that, they are offered the opportunity to continue with their two-year doctorate thesis. The doctorate degrees are of three kinds: Electronic Engineering, Information Technological Engineering and Mechatronic Engineering up to 2006. Up to now, it produced about 700 M.E students and 45 Ph.D students. Now, it is offering only doctorate degrees for Ph.D ( Electronic). On the other hand, research and development are being made in various kinds of research areas for national development. There are maximum allowance 35 master students and 10 Ph.D students in every year.

(I) ELECTRONIC ENGINEERING RESEARCH AREA  

           1.   Advanced Study on Audio and Electronics

(a)   High Frequency Microelectronics  (b)   Optoelectronic Devices (c)   Testing Techniques for VLSI Sequential Machines (d)   Integrated Circuit Design (e)   Development of Software Program (f)    Semiconductor Device Parameter Measurements and Modeling (g)   Digital Electronics (h)   Design Simulation of Special Amplifier using Semi-Custom Array Amplifier

 

           2.    Advanced Study on Electronic Communications Systems

(a)    Digital Communication Systems        (b)    Telecommunications Systems        (c)    Satellite Communication and Navigation        (d)    Cellular Telephone Systems        (e)    Radar Systems        (f)     Simulation of Wave Propagation in Integrated Optical Waveguide        (g)    Microwave Communication System        (h)    Transmission Line Modeling

          3.    Study on Computer-Integrated Manufacturing (CIM)

(a) Computer Interfacing to Industries (b) Robotics (c) High Resolution Analog (d) Supervisory Computer Control System to Industries (e) Computer Control in Industries (f) Automation and Flexible Manufacturing of Electronic System

        4.    ELECTRONIC ENGINEERING RESEARCH OTHER TOPIC

(II)   INFORMATION TECHNOLOGY RESEARCH AREA

         1. Reserach Area

(i)     Crystography (ii)    Computer Networking (iii)   Neural Network (iv)   Data Communication (v)    Inventory database management

         2. INFORMATION TECHNOLOGY RESEARCH TOPIC

1. E-community System 2. E-mail Security System 3. Parallel Computing in Solving Numerical Problems using JAVA MOBILE Agent 4. Optimum Tool Path for Three-axis CNC Milling Machine using Genetic Algorithm 5. Performance Evaluation of Mobile Agent-Based Distributed Computing for Iterative Methods 6. Parallel String Searching using Mobile Agent 7. Mobile Agent Based Office Workflow System 8. Secure Mobile Agent Execution: Computing with Encrypted Polynomials 9. Query Optimization using Mobile Agent 10. Mobile Agent-Based Load-Balancing Technique in Distributed Computing

     (III)   MECHATRONIC ENGINEERING RESEARCH AREA

                1. Research Area

(i) Industrial and Control (ii) Robotic Control System (iii) Microcontroller Based System (iv) Electronic Control System

                2.    Mechatronic Engineering Research Topic

1.    Robotic Controller 2.    Microcontroller Based Elevator Control System 3.    PC Based Computer Numerical Control (CNC) Lathe Machine 4.    Axis Extension for CNC Milling Machine 5.    Integral Programmable Intelligence Programming 6.    Electronic Control Unit (ECU) for CNG Engine

National exhibitions, seminars, international exhibitions, reading international papers are done for finished some researches.

Electronic Control Unit (ECU) for CNG Engine	Testing of Electronic Spark Ignition System for CNG Engine	Engine Speed  and position Sensor and Toothed Wheel Testing
Testing for Digital Training Kit	CNG Engine Testing with Electronic Spark Ignition System	CNG Enginee in real car